ACCESSORIES

FOR CO-CULTURE & 3D CULTURE DEVICES

Find the adapter you need for your ready-to-go eNUVIO devices. From microscopy adapters and evaporation minimizers for OMEGA devices to centrifuge adapters for EB-DISKs. We’ve got you covered!

Microscopy Adapter for OMEGA Series Devices

Given the relatively large size and shallow taper angles of many oil immersion objectives, we recommend imaging the OMEGA device using the low-profile microscopy adapter. The low-profile adapter provides adequate clearance for the objective, properly stabilizes the device for imaging, and adapts to nearly all microscope stages using the footprint of a standard glass slide (75 x 25 mm).

The adapter uses magnets to “sandwich” the OMEGA device between the magnetic top and the base, thereby stabilizing it for imaging. Simply place the OMEGA device into the central opening of the base then align and place the magnetic top onto the pins. Place the entire assembly into a standard glass slide microscope stage adapter.

SKU: eN-accma-001

Live-Cell Imaging Dish for OMEGA4, OMEGA4-2MINI,OMEGAAG, OMEGAACE and OMEGAACE-2mm Devices

Adapt your OMEGA4, OMEGA4-2MINI, OMEGAAG, OMEGAACE and OMEGAACE-2mm devices to your inverted microscope stage for high-quality live-cell or fixed microscopy. The 35 mm round microscope stage adapter fits universal or standard microscopy stages. It is specifically designed to be reused, and can be sterilized using an autoclave or steam sterilizer.

The microscopy weight adds additional stability. This weight does not fit the OMEGANMJ device. If you are looking for the Life-Cell Imaging Dish for the OMEGANMJ devices, please see below.

eN-acclco-001

Live-Cell Imaging Dish for OMEGANMJ Devices

Adapt the OMEGANMJ device to your inverted microscope stage for high-quality live-cell or fixed microscopy. The 35 mm round microscope stage adapter fits universal or standard microscopy stages. It is specifically designed to be reused, and can be sterilized using an autoclave or steam sterilizer.

The microscopy weight adds additional stability. This weight is specifically for the OMEGANMJ device. If you are looking for the Life-Cell Imaging Dish for other OMEGA devices, please see above.

eN-acclcnmj-001

Evaporation Minimizer

Reduce the evaporation rate from your OMEGA device chambers!

Simply place the blue OMEGA cell culture Evaporation Minimizer into the bottom of a 35 mm culture vessel, ensuring the opening of the circular track is facing upwards. Add your OMEGA device into the central opening and fill the Evaporation Minimizer tracks with sterile water or PBS. The Evaporation Minimizer has been specifically designed to be reused, and can be sterilized using an autoclave or steam sterilizer.

eN-accem-001

EB-DISK948 Centrifuge Adapter (single)

This adapter is used to stabilize a single 60 mm diameter EB-Disk948 culture dish during centrifugation. Fits most standard microplate swinging-bucket centrifuge rotors. 

Dimensions (L x W x D): 12.8 cm x 8.5 cm x 0.8 cm

Adapters that accommodate 2x 60 mm diameter dishes at one time are also available: EB-Disk948 Centrifuge Adapter (double)

eN-acccas-001

 

EB-DISK948 Centrifuge Adapter (double)

This adapter is used to stabilize two 60 mm diameter EB-Disk948 culture dishes during centrifugation. Fits most standard microplate swinging-bucket centrifuge rotors. 

Dimensions (L x W x D): 12.8 cm x 8.5 cm x 0.8 cm

eN-acccad-001